Sun Air Boat Builders, Inc:
Sun Air Boat Builders seasonal demand, as opposed to a need for regular, level production, means that they must keep a good line of credit at the bank. Modem cost control and inventory valuation procedures enhance our credibility with the bankers and, more importantly, have enabled them to improve their operations. Supervisors have realized the value of good cost accounting, and the main office has, In turn, become much more aware of problems in the barn.
Sun Air ’s manufacturing and warehouse facilities consisted of three historic barns converted to make 11 -foot “silver Streak ” sailboats.. The company’s plans in-Clouded the addition of 15-and 18-foot sailboats to its present line. Longer-term plans called for adding additional sizes and styles in the hope of becoming a major factor in the regional boat market.
The “Silver Streak ” was an open--cockpit,day sailer sporting a mainsail and small jib on a 17-foot,telescoping aluminum mast.It was ideally suited to the many small lakes and ponds of the region,and after three years it had become quite popular. It was priced at $2,265 complete.
Manufacturing consisted basically of three processes: molding, finishing, and assembly. The molding department mixed all ingredients to make the fiberglass hull, performed the actual molding, and removed the hull from the mold. Finishing included hand additions to the hull for running and standing rigging, reinforcement of the mast and tiller steps, and general sanding of rough spots. Assembly consisted of the attachment of cleats, turnbuckles, drain plugs, tiller, and so forth, and the inspection of the boat with mast, halyards, and sails in place. The assembly department also prepared the boat for storage or shipment. Mixing and molding fiberglass hulls, while manually simple, required a great deal of expertise, or “eyeball,” as it was known in the trade.. Addition of too much or too little catalyst, use of too much or too little heat, or failure to allow proper time
*The normal volume of operations for overhead derivation purposes was assumed to be 450 hulls per month. The estimated monthly indirect cost equation was :Budget =$9.72 *hulls +$6,561. for curing could each cause a hull to be discarded .Conversely, spending too much time on adjustments to mixing or molding equipment or on “personalized” supervision of each hull could cause severe underproduction problems. Once a batch of fiberglass was mixed there was no time to waste being overcautious or it was likely to “freeze ” in its kettle..
With such a situation, and the company ’s announced intent of expanding its product line, it became obvious that a standard cost system would be necessary to help control costs and to provide some reference for supervisors ’performance. Randy Kern, the molding department supervisor, and Bill Schmidt, Sun Air ’s accountant, agreed after lengthy discussion to the following standard costs:
Materials -Glass cloth -120 sq. ft @$2.00 $240.00
-Glass mix -40lbs .@$3.75 150.00
Direct labor -Mixing -0.5 hr .@$20.25 10.12
-Molding -1.0 hr .@$20.25 20.25
Indirect costs -Absorb at $24.30 per hull 24.30
Total cost to mold hull $444.67
Analysis of Operations:
After several additional months of operations, Bill Schmidt expressed his disappointment about the apparent lack of attention being paid to the standard costs. The molders tended to have a cautious outlook toward mixing too little or “cooking ” too long. No one wanted to end up throwing away a partial hull because there was too little glass mix.
In reviewing the most recent month ’s production results, Schmidt noted the following actual costs for production of 430 hulls:
Before proceeding with further analysis, Schmidt called Kern to arrange a discussion of variances. He also told Jan Larson, “Maybe we should look into an automated molding operation. Although I haven ’t finished my analysis, it looks like there will be unfavorable variances again. Kern insists that the standards are reasonable, then never meets them!”
Larson seemed disturbed and answered, “Well, some variances are inevitable. Why don ’t you analyze them in some meaningful manner and discuss your ideas with Kern, who is an expert in molding whose opinion I respect. Then the two of you meet with me to discuss the whole matter.”
Materials
Purchased 60,000 sq. ft glass cloth @$1.80
20,000 lbs. glass mix @$4.09
Used 54,000 sq. ft. glass cloth
19,000 lbs. glass mix
Direct Labor: Mixing 2 10 hrs. @$21.3 7
Molding 480 hrs @$20.25
Overhead :Incurred $11,140
Questions:
1. Determine the molding department ’s direct cost variances and overhead variances. Why do you think they occurred?
2. Do you think Sun Air’s standards are meaningful? How would you improve them?
3. Assume that the month ’s actual and standard production costs for items other than molding hulls amounted to $914.33 per boat, and that 430 boats were sold. Prepare a statement of budgeted and actual gross margin for the month, assuming planned sales of 450 boats.