Assignment Help - homework help

Calculate the deflection of the simply supported beam at


1. Given the figure below, calculate the deflection of the simply supported beam at the center. The material is A36 steel.

209_Calculate the deflection of the simply supported beam.png

2. Given the figure below, calculate the deflection of the simply supported beam at the center. The material is A36 steel and the beam is ten feet long. The concentrated load is at the center of the beam.

1873_Calculate the deflection of the simply supported beam1.png

3. A square bar that is 50 mm on a side is subject to 25 kN axial tension and a bending moment of 50 kNm. Compute the maximum combined stress.
4. A drive shaft transmits 80 kW of power at 60 rad/s. The drive shaft is 40 mm in diameter. It is also subject to 60 kNm bending moment. Compute the maximum shear stress in the shaft.

5. Design the length of welds for the connection below to resist 100,000 pounds in tension. Plates are 0.5 inches thick and arc A36 steel. The center plate is 6 inches wide and the outer plates are 4 inches wide. Specify the length of 3/8 inch weld and the electrodes used.

154_Calculate the deflection of the simply supported beam2.png

6. Given the diagram below, calculate the shear stress in the bolts. 

2225_Calculate the deflection of the simply supported beam3.png

Solution Preview :

Prepared by a verified Expert
Mechanical Engineering: Calculate the deflection of the simply supported beam at
Reference No:- TGS0614435

Now Priced at $40 (50% Discount)

Recommended (93%)

Rated (4.5/5)