A thin piece of semiconducting silicon will be used to


A thin piece of semiconducting silicon will be used to fabricate an electrical device. This layer is 0.10 cm thick and cut into a strip 0.50 cm wide by 1.50 cm long. Electrical contacts are placed at opposite ends of its length. The intrinsic carrier concentration of the silicon at room temperature (300K) is 1.0x10^10 cm^3 and the bandgap energy is 1.12 eV. With this data answer the following questions. (a) If the application of 1.0 volt to the contacts results in a current of 0.019 amps, what is the resistivity in (ohm-cm) of the material? (b) If the material's conductivity is due to doping with aluminum to a level of [Al]= 1x10^10 atoms/cm^3 what is the resulting conductivity "type" and what is the mobility of these "majority" carriers in this material (assuming that the aluminum is fully ionized - i.e. all Al atoms donated electrons).

Request for Solution File

Ask an Expert for Answer!!
Chemistry: A thin piece of semiconducting silicon will be used to
Reference No:- TGS0756769

Expected delivery within 24 Hours