Start Discovering Solved Questions and Your Course Assignments
TextBooks Included
Active Tutors
Asked Questions
Answered Questions
on an a a4 size sheet make a drawing of the belt drive shown in fig 5-34 the idler pulley is located midway between the
finding the shortest distance between oblique lines with the use of a grid reference lines and auxiliary views find the
finding true angles of bends in the pipe with the use of a grid reference lines and auxiliary views find the true
select one of the problems shown in figs 9-45 through 9-47 and make a working drawing of the part determine the number
make a working drawing of the gearbox shown in fig 10-48 draw the top front a full section right-side view and an
autocad provides ways to change the appearance and colors of the autocad window for example if you prefer to work on a
the autocad window includes two sets of windows-standard maximize minimize and close buttons explain why there are two
open the file dbsampdwg which is located in the sampledatabase connectivity folder use the zoom window button to zoom
start autocad switch to the 3d modeling workspace modify the workspace by stretching the command line window upward and
a boat trailer manufacturer needs a new design for the rollers that facilitate raising a boat onto the trailer the
create a new drawing file named prb4-3dwg and store it in the folder named after yourself draw the simple house
create a new drawing fi le named prb4-2dwg and store it in the folder named after yourself draw the concrete block
the traditional mantle clock body drawing shown in fig 5-22 is necessary for the reconstruction of antique and
create a new drawing draw a circle and a rectangle as illustrated in fig 6-8 use the rectang command to create the
draw the front view of the locking end cap shown in fig 7-15 start the drawing at the center of the object using
draw the front view of the slider block shown in fig 7-17 assume the spacing between dots is 125 start the drawing at
your company has purchased a new plotter for the autocad network you have been asked to configure it but since you dont
as the packaging engineer for a major manufacturer you have been asked to design a support for a new product to hold it
draw the simple house elevation shown in fig 11-10 at any size with ortho or object snap tracking and polar tracking
autocad drawings are stored in a vector format many other graphics programs such as microsoft paintreg and adobe
create the front and right-side views of the block shown in fig 12-16 then using the horizontal line above the front
create a drawing such as an elevation plan of a building a site plan of a land development or a view of a mechanical
open the attribdwg file located in the sampleactivexextattr folder use autocads zoom feature to magnify the parts list
reopen dbsampdwg and use aerial view to make a list of rooms with designations of copy is stor or coffee which of these
the artwork for one side of a small printed circuit board is shown in fig 15-14 reproduce the drawing using donuts and