Objectives of RTOS
Illustrates the objectives of RTOS?
Expert
The objectives of RTOS are as given below:
• Performance of system maximize
• Facilitating simple implantation of the application software
• Giving management functions for the memory, processes and I/Os and for other functions for that this is designed.
• Portability
• Interoperability
• Giving management and organization functions for the devices and files as well as file like devices.
• Giving common set of interfaces and
• Facilitating simple sharing of resources.
State the difference between IIR and FIR filters.
Define the term a thread.
The sketch illustrates a common consumer product termed as Water Pik. This device uses a motor to drive a piston pump that produces a jet of water (diameter d = 3 mm, temperature T = 10 °C) with a speed of 25 m/s. Find out the minimum electric power in watts which is needed by the device.
Illustrates about the Inter process Communication Mechanism?
States the term specification? Answer: Specification is a bridge in between Architect and Customer. Specification conveys the customer’s requirements. These re
The engineer is making an estimation for a home-owner. The owner has a small stream (Q = 1.4 cfs, T = 40°F) which is located at an elevation of H = 34 ft above the owner’s residence. The owner is proposing to dam the stream, diverting the flow via a pipe (pe
Explain the essential and sufficient condition for the linear phase characteristics within the FIR filter?
A bipolar junction diode contain a uniform cross-sectional region of 2x10-3 cm2 and a doping concentration of 1013 cm-3 in p-type and n-type both materials. Therefore diffusion properties are Dn = 5 cm2s-1, Ln = 50 µm for (e-
State the difference between the STAX and LDAX?
Explain several types of the cooling system in the transformers?
18,76,764
1946557 Asked
3,689
Active Tutors
1461006
Questions Answered
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!