Fix the irreversibility for changes in state and analyze fix, Mechanical Engineering

+44 141 628 6080
[email protected]

Fix the irreversibility for changes in state and analyze fix

A 3 kg piece of steel is removed from an oven at 700C and placed a water bath.The final temperature of the water is 80C and its initial temperature is 20C. The atmospheric temperature and pressure is 25C and 1 atm.

What is the mass of the water if the bath is adiabatic?

What is the entropy generation of the process?

Fix the irreversibility for the same changes in state and analyze your fix.

What is the exergetic efficiency of the process?

View Complete Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Fix the irreversibility for changes in state and analyze fix

Reference No:- TGS0740210

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Mechanical Engineering

Q : Find final temperature and work done in closed system

If the cylinder contains 4.6 lbm of refrigerant, find the final temperature (in oF) and the work done (in Btu). This is a closed system.

Q : Determine the moles of air used per mole of fuel

The combustion of methane gas (CH4) with air leads to the following volumetric analysis of the product gases on a dry basis: 9.52 % CO2, 0.28 % CO and 3.57 % O2. Determine The moles of air used per mole of fuel and the percent excess air used.

Q : Determine the amplitude and total energy

A 0.45 kg mass vibrates according to the equation x = 0.49 cos 8.45t, where x is in meters, and t is in seconds. (a) Determine the amplitude. (b) Determine the frequency. (c) Determine the total energy.

Q : Determine the entropy change for the reaction

Ethane gas is burned in a steady-flow process with 30% excess air, both of which enter separately at 25 0 C and 1 atm. Assume the reaction goes to completion, and the products leave as a mixture at 1 atm and the environmental temperature of 25 0C.

Q : Fix the irreversibility for changes in state and analyze fix

What is the entropy generation of the process? Fix the irreversibility for the same changes in state and analyze your fix.

Q : Determine the tension in the rope at the highest location

When the rope is at an angle of a = 20? the 0.5 kg sphere A has a speed v0 = 1.2 m/s. The coefficient of restitution between A and the 1 kg wedge B is 0.8 and the length of rope l = 0.8 m.

Q : How many stations are needed

A pipeline has been proposed to carry natural gas 1715 miles fro Alaska's North Slope to Calgary, Alberta, Canada. The (smooth) pipe diameter will be 52 inches. The gas will be at high pressure, averaging 2500 lbs/in².

Q : Determine the feed rate required for the mined coal

In a mechanical coal-washing process, a portion of the inorganic sulfur and ash material in the mined coal can be removed. A feed stream to the process consists of 73% coal, 11% ash, 11% sulfur, and 5.0% water (to suppress dust).

Q : Find the standard hour rate to be used in the calculation

If the management decided to use the standard hour plan as an incentive system, find the standard hour rate to be used in the calculation of the payments to the workers?

1941474

Questions
Asked

3,689

Active Tutors

1423935

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Fix the irreversibility for changes in state and analyze fix

Reference No:- TGS0740210

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Find final temperature and work done in closed system

Q : Determine the moles of air used per mole of fuel

Q : Determine the amplitude and total energy

Q : Determine the entropy change for the reaction

Q : Fix the irreversibility for changes in state and analyze fix

Q : Determine the tension in the rope at the highest location

Q : How many stations are needed

Q : Determine the feed rate required for the mined coal

Q : Find the standard hour rate to be used in the calculation

What order for professional to held liable for malpractice

Nurse is caring for a client who has copd

Discuss - percutaneous transluminal coronary angioplasty

What nursing action would be appropriate of complication

Legal and ethical issues related to assessment

How to evaluate healthcare-associated risk for infection

Examining a patient who may have oral cancer

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: Fix the irreversibility for changes in state and analyze fix

Reference No:- TGS0740210

Recent Questions Asked Mechanical Engineering

Q : Find final temperature and work done in closed system

Q : Determine the moles of air used per mole of fuel

Q : Determine the amplitude and total energy

Q : Determine the entropy change for the reaction

Q : Fix the irreversibility for changes in state and analyze fix

Q : Determine the tension in the rope at the highest location

Q : How many stations are needed

Q : Determine the feed rate required for the mined coal

Q : Find the standard hour rate to be used in the calculation

Asked Questions