--%>
Assignment Help - homework help

Multifunction displays

What is meant by the multifunction displays?

E

Expert

Verified

In the multifunction displays, CRT displays serve as the MFKs. Most common way is for the CRT face to consist of the function labels which is correlated with the adjacent switches mounted within the bezel surrounding the CRT. It is easy through the software to alter the switch function and the associated label on the CRT. The second method of implementing the MFKs on CRTs is to overlay CRT face along with the touch-sensitive screen. The CRT face consists of several switch function legends and the corresponding function is selected by touching that particular portion of the screen over the switch label.

   Related Questions in Electrical Engineering

  • Q : Find out outer dimension required to

    A high-wattage resistor for employ in a dc power supply is formed through depositing Carbon containing a square cross-section to an insulated former containing a cylindrical shape along with a diameter of 2.5 millimetres. A section with the component is demonstrat

    		•
  • Q : What is IMR Explain what is meant by

    Explain what is meant by the IMR or Interrupt mask register?

    		•
  • Q : Find out secondary voltage and number

    A step-down transformer that operating from a 50Hz mains supply of 220 Volt rms, is used to give a decrease voltage to a secondary power supply. The final delivers 400 Watt of power to a load consisting of an equivalent resistance of 10?. The transformer should have a

    		•
  • Q : Determine the impedance of the parallel

    Find out the impedance of the parallel R-C network demonstrated in figure below at a frequency of 150Hz and express this in the form of phase and magnitude. Calculate the current flowing in the network from the source and the individual currents flowing by the resisto

    		•
  • Q : Counter and Frequency Counter Explain

    Explain the term Counter. Describe in detail. Write note on the Frequency Counter? Specify the major blocks which are present within the frequency counter.

    		•
  • Q : Describe rationale of design approach

    A driver circuit is needed to operate the solenoid that controls the flow-valve within an effluent disposal system. There valve opens while the solenoid is activated upon receipt of an active-high input control pulse, consisting of a minimum level of ½ of the s

    		•
  • Q : Schemes of analog modulations Write

    Write down the three different basic schemes of analog modulations?

    		•
  • Q : Wavelength and Bandwidth Define: a)

    Define: a) Wavelength b) Bandwidth b) Attenuation

    		•
  • Q : Full form of MIMO Write down the full

    Write down the full form of MIMO? Also describe it in detail.

    		•
  • Q : Elementary signals Explain the term

    Explain the term elementary signals and list them?

    		•