homework
i wanna this homework within 2 days
The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal
Determine a Thevenin and a Norton Equivalent Model for the circuit demonstrated in figure given below. Find out, using the models, the voltage across and the current by the load resistance that is RL, and the power consumed through the load. Verify both models present
A bipolar junction diode is to be fabricated consisting of the p-type material hundred times further heavily doped than the n-type material. Find out the doping concentration needs so as to acquire a barrier potential of V0 = -0.5V on a temperature of 300oK.
Illustrate briefly the term resistor?
Explain the term VRC.
Explain various addressing modes of 8051?
Explain the Gibbs phenomenon?
State the importance of the TXD and RXD pins within the 8051?
State the difference between IIR and FIR filters.
What is meant by the multifunction displays?
18,76,764
Questions Asked
21,311
Experts
9,67,568
Questions Answered
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!