--%>
Assignment Help - homework help

What are the elements of embedded system

What are the elements of embedded system?

E

Expert

Verified

The three major elements of an embedded system are as follows:

Hardware, Main application software and RTOS.

   Related Questions in Electrical Engineering

  • Q : Determine inductor value to accurate

    Find out the Power Factor of the alternating current network demonstrated below, while operating at a frequency of 50Hz. Thus, establish a revised value for the inductor, L that will accurate the Power Factor of the network to unity.

    Q : Schedulability and its types What are

    What are schedulability and its types?

    		•
  • Q : Calculate the current needed to feed

    A coil having of 6,000 turns is wound upon a former of length 12cm and diameter 3cm that has a wax core having a relative permeability of 1,500. The coil should produce a total magnetic flux of 0.1 Wb. Calculate the current needed to feed the coil.

    		•
  • Q : Networking Develop traffic flow mapping

    Develop traffic flow mapping and performance requirements for flows.

    		•
  • Q : What is Digital Voltmeter Explain about

    Explain about Digital Voltmeter. Also explain about ADD3501 used in-digital voltmeters.

    		•
  • Q : Find range of cancellation voltage A

    A pressure transducer having a Wheatstone bridge construction has the properties listed in the table below. The transducer is exited using a constant current source having an adjustable range and temperature coefficient. The zero pressure offset of the transducer must

    		•
  • Q : Determine the force between two charged

    Determine the force between two charged bodies, Q1 and Q2, having charges of Q1 = 0.5 C and Q2 = 0.25 C, respectively and placed a distance of 10 cm apart if Coulombs Constant, ke =8.98 x 109. 

    		•
  • Q : Characteristics of main and peripheral

    Explain few characteristics of the main and the peripheral memory.

    		•
  • Q : Determine the impedance of the parallel

    Find out the impedance of the parallel R-C network demonstrated in figure below at a frequency of 150Hz and express this in the form of phase and magnitude. Calculate the current flowing in the network from the source and the individual currents flowing by the resisto

    		•
  • Q : Operating mode 0 of 8051 serial port

    Explain what is operating mode 0 of 8051 serial port?

    		•