What is the cutting force in newtons, Mechanical Engineering

+44 141 628 6080
[email protected]

What is the cutting force in newtons

A workpiece is being cut at 76m/min (250 fpm), and the power is found to be 2.0 kW (2.7hp). The feed is .25 mm/rev (.010 in/rev) and the depth of cut is 5.0 mm (.200 in)

a)What is the cutting force in Newtons (pounds)?

b)What is the unit power consumption in kW/cm^3/min (hp/in^3/min)?

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: What is the cutting force in newtons

Reference No:- TGS0739447

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Sample to statistically estimate this mean

The library wants to take a sample to statistically estimate this mean. How large will the sample need to be to estimate the mean within 0.28 of 1 standard deviation with 0.95 confidence?

Q : What is the apertures height and width

The central order for a diffraction pattern from a rectangular aperture is measured to be 15 mm high and 5 mm wide on a screen 1 m away. If the illumination has a wavelength of 633 nm, what is the aperture's a) height? b) Width?

Q : Determine the moments of inertia

Two channels are welded to a rolled W section as shown. Determine the moments of inertia and the radii of the gyration of the combined section with respect to the centroidal x and y axis.

Q : Highest per capita annual income

In a recent year, Deleware had the highest per capita annual income with $51,803 . Standard deviation = $4850, find the mean that falls at the 95th percentile for a sample of 35 residents?

Q : What is the cutting force in newtons

A workpiece is being cut at 76m/min (250 fpm), and the power is found to be 2.0 kW (2.7hp). What is the cutting force in Newtons (pounds)?

Q : What is the mean internal energy of the gas

One mole of a monatomic ideal gas is in a fixed volume container and is in thermodynamic equilibrium with its surroundings at termperature 0 degrees C with 1 atm of pressure inside the container. a) What is the mean internal energy of the gas?

Q : Question regarding the finance charges

John Sullivan bought a new Brunswick Boat for $17,000. He put a $2,500 down payment on it. The bank's loan was for 60 months. Finance charges totaled $4,900. His monthly payment is:

Q : Describe for the cycle the mass flow rate of steam

Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in^2. The net power output of the cycle is 1 x 10^9 Btu/h.

Q : Calculate the power required for the cut in kw

The cutting force F_c is found to be 1780N (400lb) and the normal force F_t is 890 N(200lb). The rake angle of the tool is +8 degrees. Find the power required for the cut in KW (hp).

1937304

Questions
Asked

3,689

Active Tutors

1447550

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: What is the cutting force in newtons

Reference No:- TGS0739447

Have a Question? (oR Write a Review)

Recent Questions Asked Mechanical Engineering

Q : Sample to statistically estimate this mean

Q : What is the apertures height and width

Q : Determine the moments of inertia

Q : Highest per capita annual income

Q : What is the cutting force in newtons

Q : What is the mean internal energy of the gas

Q : Question regarding the finance charges

Q : Describe for the cycle the mass flow rate of steam

Q : Calculate the power required for the cut in kw

How can project managers ensure plan visibility

Identify the true statements about technology

Problem on project outcomes and client satisfaction

Process of change on an individual

What potential impact does generative ai have on workers

What are employers looking for in a behavioral interview

How perform could be done in a better way

Request for Solution File

Ask an Expert for Answer!!

Mechanical Engineering: What is the cutting force in newtons

Reference No:- TGS0739447

Recent Questions Asked Mechanical Engineering

Q : Sample to statistically estimate this mean

Q : What is the apertures height and width

Q : Determine the moments of inertia

Q : Highest per capita annual income

Q : What is the cutting force in newtons

Q : What is the mean internal energy of the gas

Q : Question regarding the finance charges

Q : Describe for the cycle the mass flow rate of steam

Q : Calculate the power required for the cut in kw

Asked Questions