Thermal efficiency and utilization factor, Physics

+44 141 628 6080
[email protected]

Thermal efficiency and utilization factor

A 1000 MW power plant is operated for a year. It has a thermal efficiency of 32% and a utilization factor of 0.8. Assume that only 235U is fissioned to generate the energy. The question now is how much 235U has been consumed? Is this a good assumption to make?

Request for Solution File

Ask an Expert for Answer!!

Physics: Thermal efficiency and utilization factor

Reference No:- TGS0734281

Expected delivery within 24 Hours

Have a Question? (oR Write a Review)

Write atleast 100 words!!

Recent Questions Asked Physics

Q : Estimate the wind speed needed to tip the drum over

Wind is blowing on a 55-gallon drum. Estimate the wind speed needed to tip the drum over. Work in SI units. The mass of the drum is 48 lbm, the diameter is 22.5 in, and the height is 34.5 in.

Q : On what stable period should the reactor be placed

During test-out procedures, a 239Pu fueled thermal reactor is operated for a time at a power of 1 MW. The power is then to be increased to 100 MW in 8 hrs. A) On what stable period should the reactor be placed? B)what reactivity insertion is requi

Q : Calculate the expected amount of the surcharge

An individual who has automobile insurance from a certain company is randomly selected. Let Y be the number of moving violations for which the individual was cited during the last 3 years. The pmf of Y is the following.

Q : Pmf of the amount of memory

The pmf of the amount of memory X (GB) in a purchased flash drive is given as the following.

Q : Thermal efficiency and utilization factor

Q : Calculate the nernst voltage of the pefc

Consider a PEFC operating with the following specifications: = 80% and the pressure is 2 atm at the anode, and = 20% and the pressure is 3 atm at the cathode. Assume that the gibbs free energy of formation at standard pressure for at 90o C is -233

Q : What is the final temperature of the ethanol

At these conditions, the latent heat of vaporization of ethanol is 779 kJ/kg. The final pressure of the ethanol is 1 atm. What is the final temperature of the ethanol, and why?

Q : At what value of parasitic power does the addition of pump

However, the pump requires 60 W of parasitic power to operate continuously. Is installation of the pump justified? Explain. At what value of parasitic power does the addition of the pump become unjustified?

Q : Calculate the probability

A mail-order company business has six telephone lines. Let X denote the number of lines in use at a specified time. Suppose the pmf of X is as given in the accompanying table.

1945491

Questions
Asked

3,689

Active Tutors

1458440

Questions
Answered

Start Excelling in your courses, Ask a tutor for help and get answers for your problems !!

ask Question

Request for Solution File

Ask an Expert for Answer!!

Physics: Thermal efficiency and utilization factor

Reference No:- TGS0734281

Have a Question? (oR Write a Review)

Recent Questions Asked Physics

Q : Estimate the wind speed needed to tip the drum over

Q : On what stable period should the reactor be placed

Q : Calculate the expected amount of the surcharge

Q : Pmf of the amount of memory

Q : Thermal efficiency and utilization factor

Q : Calculate the nernst voltage of the pefc

Q : What is the final temperature of the ethanol

Q : At what value of parasitic power does the addition of pump

Q : Calculate the probability

Discuss social worker working with foster children

Identify one antecedent, one behaviour, and one consequence

Describe some of your personality traits

Problem on journal articles and non-journal materials

Examine historical literature to the most current period

Discuss three ethical guidelines that are important

Outline a social issue that is important to you

Request for Solution File

Ask an Expert for Answer!!

Physics: Thermal efficiency and utilization factor

Reference No:- TGS0734281

Recent Questions Asked Physics

Q : Estimate the wind speed needed to tip the drum over

Q : On what stable period should the reactor be placed

Q : Calculate the expected amount of the surcharge

Q : Pmf of the amount of memory

Q : Thermal efficiency and utilization factor

Q : Calculate the nernst voltage of the pefc

Q : What is the final temperature of the ethanol

Q : At what value of parasitic power does the addition of pump

Q : Calculate the probability

Asked Questions