Additional capacitor do you need to produce a capacitance
You need a capacitance of 40 µF but you don't happen to have a 40 µF capacitor. You do have a 56 µF capacitor. What additional capacitor do you need to produce a total capacitance of 40 µF?
Expected delivery within 24 Hoursrs
A sound has an intensity of 38.0 w/m2. A second sound has an intensity level which is 2.5 dB greater than the intensiry level of the first sound. What is the intensity of the second sound?
A classic 1957 Chevrolet Corvette of mass 1240 kg starts from rest and speeds up with a constant tangential acceleration of 3.00 m/s2 on a circular test track of radius 60.0 m. treat the car as a particle.
Find the edge dimension of each cube, which represents an estimate for the spacing between atoms.
a thin conducting wire connects the spheres, redistributing the charge on each sphere. When the wire is removed the spheres still repel but with a force of F2 = 0.100 N.
Assume the rope is massless, there is no slipping of the rope on the pulley, and there is no friction between m1 and the incline. a.) What is the acceleration of m1 and m2? What is the angular acceleration of the pulley?
Assume that the transmission of the van is in neutral, the brakes are not being applied, and the collision is elastic. What is the final velocity of the car?
Light rays in a material with index of refrection 1.25 can undergo total internal reflection when they strike the interface with another material at a critical angle of incidence. Find this material\'s index of refraction when the required critica
You stand 3.33 m from the wall on which the board hangs. The dart leaves your hand with a horizontal velocity at a point 2.02 m above the ground. The dart strikes the board at a point 1.77 m from the ground. a) calculate the intial speed of the da
In a circus act, an 18kg dog is trained to jump onto a 3.0 kg skateboard moving with a velocity of 0.14 m/s. At what velocity does the dog jump onto the skateboard if afterward the velocity of the dog and skateboard is -0.10 m/s
A steam pipe is covered with 1.50 cm thick insulating material with a thermal conductivity of 0.200 cal/cm·°C·s.
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!