Explain Real Time Clock and Timers in embedded system
Explain Real Time Clock and Timers in embedded system.
Expert
Timing and Counting requires of the System, a timer circuit properly configured is the system-clock, also termed as real-time clock (RTC). This is used by the schedulers and for real-time programming. Moreover one timer using the system clock (RTC) may be required for the different timing and counting requires in a system.
Define the term CAN bus its used?
What do you mean by CMRR? Describe in brief.
A piece of homogenous semiconductor material that is n-type of length 100µm as well as uniform cross-sectional area of 5x10-4 cm2 having a doping concentration of 1017cm-3. There a linear gradient of carrier concentrat
Replace the network demonstrated below, that operates at a frequency of 50Hz, along with an equivalent network containing only two passive elements. Q : What are the examples of functional What are the examples of functional requirements?
What are the examples of functional requirements?
State the difference between the SHLD and LHLD?
The pole faces of a permanent magnet measure 100 millimeter high by 200mm wide. This is needed to acquire an acceleration of 10ms-2 of a single length of current-carrying conductor that weighs 250gm-1 and is positioned vertically inside the magnetic field, passing horizontal
An operational amplifier contains an open-loop transfer function specified as: A(?) = 104/([1 + j(?/31.4x106)][1 + j(?/314x 106)]) The op-amp is
Explain the following terms: Half-duplex communication and full duplex communication.
What do you mean by the term Yagi-Uda antenna? Describe in brief.
18,76,764
1945916 Asked
3,689
Active Tutors
1455608
Questions Answered
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!