Determine magnitude of the force on the dipole
A point charge is distance from the center of a dipole consisting of charges separated by distance . The charge is located in the plane that bisects the dipole. At this instant, assuming r>>s what is the magnitude of the force on the dipole?
Expected delivery within 24 Hoursrs
Lori, who loves to ski, has rigged up a rope tow to pull herself up a local hill that is inclined at an angle of 30.0 degrees from the horizontal. The motor works against a retarding frictional force of 100 N. If Lori has a mass of 60.5 kg, and th
An elevator cable can withstand a maximum tension of 19,500N before breaking. The elevator has a mass of 490 kg and a maximum acceleration of 2.24 m/s2. Engineering safety standards require that the cable tension never exceed two-thirds of the br
The golf club was in contact with the ball for 3.0×10-3 . Find the impulse imparted to the golf ball. Find the average force exerted on the ball by the golf club.
A 45.5-cm diameter disk rotates with a constant angular acceleration of 2.0 rad/s2. It starts from rest at t = 0, and a line drawn from the center of the disk to a point P on the rim of the disk makes an angle of 57.3° with the positive x-axis
A charge of +4 Coulombs is placed at the 100 cm mark of the same meter stick. Where should a proton be placed on the meter stick so that the net force on it due to the two charges is 0?
What is the strength of the magnetic field required to exactly balance the weight of the proton and keep it moving horizontally?
when the pin is removed and the gas is allowd to expand, the lenght of the gas-filled chamber doubles. the initial and final temperatures are equal. determine the spring constant.
A charge moves a distance of 2.3 cm in the direction of a uniform electric field having a magnitude of 239 N/C. The electrical potential energy of the charge decreases by 72.3544 × 10-19 J as it moves. Find the magnitude of the charge on the
Inside an insulated container(so no thermal energy can be exchanged with the surroundings). What is the number of ways blocks A and B can have 5 quanta each?
This process is repeated to cause the rotor to turn steadily at an angular speed of 3.84 103 rev/min. (a) Find the maximum torque acting on the rotor.
Start Excelling in your courses, Ask an Expert and get answers for your homework and assignments!!